Hakko FX-901/P Cordless Battery Soldering Iron vs Weller WE1010NA Digital Soldering Station
Head-to-head spec comparison to help you pick the right bench tool for your needs.
Hakko
$33.12
Weller
$115
Verdict
It's a Tie
The Hakko FX-901/P Cordless Battery Soldering Iron and Weller WE1010NA Digital Soldering Station are evenly matched — your choice depends on which features matter most to you.
Comparing brands?
Read the full Hakko vs Weller vs JBC: The Definitive Soldering Station Brand Comparison →
Brand philosophies, tip ecosystems, 5-year TCO math, and what we'd actually buy with our own money.
Read the brand-comparison guide →Spec-by-Spec Comparison
| Spec | Hakko FX-901/P Cordless Battery Soldering Iron | Weller WE1010NA Digital Soldering Station |
|---|---|---|
| Station Type | Cordless Soldering Iron | Digital Soldering Station |
| Wattage | 6 W | 70 W |
| Temp Range | N/A °C | 200–450°C °C |
| Temp Stability | 0 ±°C | 5 ±°C |
| Tip System | Fixed Battery Tip | ET Series |
| Digital Display | No | Yes |
| Temp Lock | No | Yes |
| Sleep Mode | No | Yes |
| Hot-Air Channel | No | No |
| Channels | 1 | 1 |
| Price | $33.12 | $115 |
| Rating | 3.9/10 | 4.4/10 |
| Buy on Amazon | Buy on Amazon |
Pros & Cons
Hakko FX-901/P Cordless Battery Soldering Iron
Pros
- Genuinely cordless — battery-powered, no bench outlet or station box required
- Useful as a field or automotive second iron when a mains station isn't practical
- Hakko's reliability reputation carries over from the FX-888D line
- Inexpensive enough to keep as a dedicated travel iron alongside a bench station
Cons
- 6W output only handles light-gauge wire and small joints — not a PCB rework tool
- No digital display, temperature lock, or adjustable set-point — a simple on/off battery iron
- Heat-up time and battery life are both noticeably worse than a mains station
- This is a second iron, not a primary bench tool — pair it with a real station like the FX-888D
Weller WE1010NA Digital Soldering Station
Pros
- 70W gives noticeably better heat recovery on large joints than 60W Hakko
- Iron heats from cold to 400°C in under 20 seconds
- ETA tip series is affordable and widely available at hardware stores
- Large easy-to-read display with lock function
- Compatible with Weller's older WES51 tips — huge legacy ecosystem
- Often $10–20 cheaper than FX-888D
Cons
- Temperature stability slightly looser than Hakko (~±5°C vs ±2°C under load)
- Iron cable is stiffer and heavier than Hakko's
- No programmer presets — single temperature display only
- Holder design collects flux residue and is harder to clean
Our Verdicts
Hakko FX-901/P Cordless Battery Soldering Iron
Not a bench station and shouldn't be judged as one — the FX-901/P is a cheap, genuinely useful cordless second iron for field repairs and automotive work where an outlet isn't an option. Buy it to complement a real station, not to replace one.
Weller WE1010NA Digital Soldering Station
The WE1010NA trades Hakko's precision for raw wattage and lower entry cost. For beginners and hobbyists who solder intermittently, it's excellent. Professionals who care about tight temp stability should step up to FX-888D or better.
Frequently Asked Questions
Which is better, the Hakko FX-901/P Cordless Battery Soldering Iron or the Weller WE1010NA Digital Soldering Station?
It depends on your use case. Hakko FX-901/P Cordless Battery Soldering Iron (Hakko, $33.12): Not a bench station and shouldn't be judged as one — the FX-901/P is a cheap, genuinely useful cordless second iron for field repairs and automotive work where an outlet isn't an option. Buy it to complement a real station, not to replace one. Weller WE1010NA Digital Soldering Station (Weller, $115): The WE1010NA trades Hakko's precision for raw wattage and lower entry cost. For beginners and hobbyists who solder intermittently, it's excellent. Professionals who care about tight temp stability should step up to FX-888D or better.
How much does the Hakko FX-901/P Cordless Battery Soldering Iron cost vs the Weller WE1010NA Digital Soldering Station?
As of 2026, the Hakko FX-901/P Cordless Battery Soldering Iron is $33.12 and the Weller WE1010NA Digital Soldering Station is $115 on Amazon — a $81.88 difference. Amazon list prices fluctuate; check the linked product pages for current pricing.
Is the Hakko FX-901/P Cordless Battery Soldering Iron good for beginners?
Hakko FX-901/P Cordless Battery Soldering Iron is suited for: beginner, vintage. Weller WE1010NA Digital Soldering Station is suited for: beginner, hobbyist. If you're picking your first bench tool, choose the one whose use-case list includes "beginner" — and prioritize ease of setup over advanced features.
Which has the better support ecosystem, Hakko or Weller?
Hakko FX-901/P Cordless Battery Soldering Iron: uses the Fixed Battery Tip tip ecosystem, so replacement tips and specialty shapes matter. Weller WE1010NA Digital Soldering Station: uses the ET Series tip ecosystem, so replacement tips and specialty shapes matter.